Number of views:
Product serial number
Rapid Prototype Service
Precision parts processing is a widely used finishing process. After processing, the precision can reach IT5 level, and the surface roughness can reach Ra0.1~0.006μm. It can process metal materials and non-metal materials.
Features of fine grinding processing:
1. Micro cutting. Because there are many abrasive particles scattered between the workpiece and the grinding tool, the load on a single abrasive particle is very small, and by controlling the appropriate processing load scale, a cutting depth of less than 1μm can be obtained to complete the micro-cutting of the workpiece data.
2. Shaped according to the principle of evolution. When the grind tool touches the workpiece, under the effect of non-mandatory grinding pressure, it can actively select the local protrusions for processing, so only the data of the two protrusions are cut off. Thus, the lap and the workpiece are trimmed to each other and the accuracy is gradually improved.
3. Multi-edge multi-directional cutting. In the grinding process, because the shape of each abrasive grain is not completely consistent, and the randomness of the dispersion, when the abrasive grains slide and roll on the workpiece, it can complete multi-directional cutting, and the cutting timing and cutting edge crushing rate of the whole abrasive grain Equal, can complete active sharpening.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table